Sign In | Join Free | My brakesband.com
China Zhuzhou Ruideer Pm Equipment Manufacturing Co., Ltd. logo
Zhuzhou Ruideer Pm Equipment Manufacturing Co., Ltd.
Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co., Ltd.
Verified Supplier

2 Years

Home > Vacuum Sintering Furnace >

Vacuum sintering furnace is mainly used for vacuum sintering, vacuum cooling and rapid cooling of stainless steell

Zhuzhou Ruideer Pm Equipment Manufacturing Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Vacuum sintering furnace is mainly used for vacuum sintering, vacuum cooling and rapid cooling of stainless steell

Brand Name : Ruideer

Model Number : 400*400*1200

Certification : CE;ISO9001;ISO14001;OHSAS 18001;GB/T29490

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : L/C, T/T

Supply Ability : 8 sets/month

Delivery Time : 100-120 work days

Packaging Details : Exempted from inspection wooden case

Structure : single chamber,horizental type

Furnace shell material : Carbon steel

Weight : 10t

Warranty : 1 year

After sales : Engineer can be dispached to foreign country to finish the installation and commissioning work

Painting : black,white,gray,blue,green

Contact Now

Design standards:
The cemented carbide pressure sintering furnace is a single chamber and double door horizontal and periodic heating structure,which is designed for easy handling and maintenance, the whole process is controlled automatically.It can realize full load continuous operation, 300 furnace times/year or 300 working days/year.It uses graphite element resistance heating (low voltage, high current) .In addition, there are multiple heating units, each of which controls the temperature separately.It equipped with fully automatic control function and safety interlock function.The whole process is automatically controlled, monitored, tracked and recorded by computer.The PLC, industrial computer (PC) control to realize the whole process of one-key start, real-time dynamic monitoring, computer will save temperature, pressure, vacuum and other parameters ,alarm interlocking is safe and reliable.


Painting:
The surface of furnace body, transformer, control cabinet and vacuum pump is light gray (color code: RAL7035). The furnace foot, pump frame and support are matched by sky blue (color code: RAL5015).The groove is stainless steel, the support is galvanized, the transformer is placed on the ground.


General equipment requirements:
The equipment is mainly used for stainless steel(MIM),debinding of cemented carbide (vacuum Ar carrier gas debinding and hydrogen micro-positive pressure debinding), vacuum sintering, partial pressure sintering, pressure sintering, rapid cooling and other processes.It can meets the strict requirement of uniformity of furnace temperature and atmosphere in sintering process of cemented carbide.The furnace structure design is advanced and reasonable, easy to use operation and maintenance.The main supporting components (control components, sensors, graphite heating element, thermocouple, main control valve, vacuum pump, etc.) have the international advanced level, can adapt to the long-term, stable, reliable batch production requirements.At the same time, the equipment meets the national requirements for energy conservation and environmental protection.


(W*H*L)

Available working zone size

400mm×400mm×1200mm

Max.loading weight

500kg

Working temperature

1350℃

1350℃(maximum working temperature)

1300℃

1300℃(actual working temperature )


Pumping speed


The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa

(After drying the furnace,under the empty furnace, clean and cold state.)



Leakage rate


≤3Pa/h

(Measuring the limit vacuum after drying the furnace, stop the operation of the pump group and start the test.Average within 3 hours in empty furnace, clean and cold state)



Cooling speed



Empty furnace,the cooling time of cooling temperature from 1300℃ down to 100℃ just cost less or equal 5 hours.(water temperature≤28℃,2bar≤water pressure≤3bar)



Cooling speed

配置有快冷风机风冷及水冷随炉共同冷却.

The inner furnace is equipped with rapid cooling fan and cooling water realize rapid cooling.


Heat rod material


Graphite


Heating up speed


Empty furnace heating up≤5℃


Heating power



It is about 120KVA


Uninterrupted power supply guarantee time



It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes.

After sales:

1.Installation, Commissioning And Acceptance

We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.

The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.


2.Training

When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)


3. Warranty period

The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.




Quality Vacuum sintering furnace is mainly used for vacuum sintering, vacuum cooling and rapid cooling of stainless steell for sale

Vacuum sintering furnace is mainly used for vacuum sintering, vacuum cooling and rapid cooling of stainless steell Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Zhuzhou Ruideer Pm Equipment Manufacturing Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)